AP 3D Fabric Medium/Printing Binder
Material Safety Data Sheet – Revised 10/01/2023
Please read this information carefully.
Please also remember that the advice is based on supply of industrial quantities of binder.
It is therefore recommended that this be taken in to account when undertaking risk
assessment in the context of significantly lower levels of exposure for this or any other product.
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
| Product Name | AP 3D Fabric Medium/Printing Binder |
| Company Name | Colourcraft Colours & Adhesives Ltd Unit 5 555 Carlisle Road East Sheffield S4 8DT |
| Telephone | 0114 242 1431 |
| Fax | 0114 242 4844 |
| Emergency | 0114 242 1431 |
2. COMPOSITION/INFORMATION ON INGREDIENTS
| Acetate Copolymer Dispersions, bases and cross linking agents. |
3. HAZARDS IDENTIFICATION
| Most Important Hazards | None – This product is not classified as hazardous. |
| Specific Hazards | This product does not present any specific risk. |
4. FIRST-AID MEASURES
| Inhalation | Unlikely route of exposure. If distress is felt, remove affected person to fresh air. |
| Skin Contact | Wash thoroughly with soap and water irritation occur, seek medical advice. |
| Eye Contact | Irrigate with water for at least 10 minutes. Should |
| Ingestion | Wash mouth out thoroughly with water, give water to drink. In the unlikely event of sensitivity, seek medical advice. |
5. FIRE FIGHTING MEASURES
| Product is not considered a fire hazard | |
| Fire Extinguishing Media | Suitable: Water, Fog, CO2, Dry Powder, Foam Unsuitable: None |
| Personal Protection | Wear self contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes. |
6. ACCIDENTAL RELEASE MEASURE
| Personal Precautions | Refer to section 8 of HSDS for personal protection details. |
| Environmental Precautions | Do not allow to contaminate water courses. 3 |
| Cleaning Measures | Absorb small spills with kitchen roll and soap and water. Large spills – Absorb product with sand or inert material. Clean up contaminated area with water. |
7. HANDLING & STORAGE
| Handling Requirements | Avoid eye contact and also skin contact of long duration |
| Storage Conditions | Store at a temperature between 6°C and 35C. Keep container closed and out of the reach of young children. 6 month shelf life. |
| Suitable Packaging | Keep in original packaging. |
| Additional Information | Handle in accordance with good standards of hygiene and safety practices. |
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
| Inhalation | None under normal usage conditions. |
| Hand Protection | None under normal usage conditions. |
| Eye Protection | Goggles or protective peak when pouring off. |
| Skin Protection | Working clothes. |
9. PHYSICAL & CHEMICAL PROPERTIES
| Appearance | Viscous Liquid | Explosive Properties | N/A |
| Odour | Slight characteristic | Oxidising Properties | N/A |
| pH | 6.5 – 7.5 | Vapour Pressure | N/A |
| Boiling point/range | 100°C | Relative Density | N/A |
| Melting point/range | N/A | Bulk Density | N/A |
| Flash Point | N/A | Partition Coefficient | N/A |
| Flammability | N/A | Other Data | 28 |
| Auto Flammability | N/A | ||
| Solubility | Water: Miscible | Fat: N/A | Solvents: N/A |
10. STABILITY AND REACTIVITY
| Conditions to Avoid | None |
| Materials to Avoid | None |
| Hazards Decomposition Products | None |
11. TOXICOLOGICAL INFORMATION
| Acute Oral LD50 | >2500mg/kg |
| Inhalation | There is no danger from inhalation under normal use conditions. Inhalation of nebulised product may cause mild irritation to the respiratory system. |
| Skin Irritation | Skin contact of long duration may cause mild irritation. |
| Eye irritation | Contact of long duration may cause mild irritation. Raw Materials – Non Toxic |
12. ECOLOGICAL INFORMATION
| General | The product is easily disposed of from waste water by flocculation up to 95% |
13. DISPOSAL
| Unused Material | Dispose as household waste but in accordance with any regional or national regulations. |
| Packaging | In accordance with any regional and national regulations. |
14. TRANSPORT INFORMATION
| Shipping Name | This product is not classified as hazardous for transport under United Nations Transport Recommendations |
| UN Number Hazard Class ADR/RID Symbol Packaging Group IATA/DGR Limits |
15. REGULATORY INFORMATION
| This product is not classified as hazardous. |
Note:
The regulatory information given above only indicates the principle regulations specifically applicable to the product described in the safety data sheet. The user’s attention is drawn to the possible existence of additional provisions which complete these regulations. Refer to all applicable national, international and local regulations or provisions.
16. OTHER INFORMATION
Legal Disclaimer
The information contained in this data is accurate to the best of our knowledge and is intended to describe our products from the point of view of Health and Safety requirements. It should not, therefore, be construed as guaranteeing any specific properties. Colourcraft C & A Ltd shall not be held liable for any damage resulting from handling or from contact with the above product.
Abbreviations
| N/A = Not applicable | N/K = Not Known | N/D = Not determined |
