Have a Question?
< All Topics
Print

AP Pre Coat and Crackle Glaze

Health & Safety Data Sheet – Revised 10/01/2023

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Product NameAP Pre Coat and Crackle Glaze
Company NameColourcraft Colours & Adhesives Ltd
Unit 5
555 Carlisle Street East
Sheffield
S4 8DT
Telephone0114 242 1431
Fax0114 243 4844
Emergency0114 242 14310

2. COMPOSITION/INFORMATION ON INGREDIENTS

Acetate Copolymer Dispersions, bases and cross linking agents.

3. HAZARDS IDENTIFICATION

Most Important HazardsNone – This product is not classified as hazardous.
Specific HazardsThis product does not present any specific risk.

4. FIRST-AID MEASURES

InhalationUnlikely route of exposure. If distress is felt, remove
affected person to fresh air.
Skin ContactWash thoroughly with soap and water.                   
Eye Contact             Irrigate with water for at least 10 minutes. Should
irritation occur, seek medical advice.
IngestionWash mouth out thoroughly with water, give water to drink. In the unlikely
event of sensitivity, seek medical advice.

5. FIRE FIGHTING MEASURES

Product is not considered a fire hazard.
Fire Extinguishing MediaSuitable: Water, Fog, CO2, Dry Powder, Foam
Unsuitable: None
Personal Protection Wear self contained breathing apparatus. Wear protective
clothing to prevent contact with skin and eyes.

6. ACCIDENTAL RELEASE MEASURE

Personal Precautions        Refer to section 8 of HSDS for personal protection details.
Environmental Precautions Do not allow to contaminate water courses.
Cleaning MeasuresAbsorb spilled product with sand or inert material. Clean up
contaminated area with water.                        

7. HANDLING & STORAGE

Handling RequirementsAvoid eye contact and also skin contact of long duration.
Storage ConditionsStore at a temperature between 6°C and 35C. Keep container closed and
out of the reach of young children.  6 month shelf life.
Suitable PackagingKeep in original packaging
Additional InformationHandle in accordance with good standards of hygiene and safety practices.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

InhalationNone under normal usage conditions.
Hand ProtectionNone under normal usage conditions.
Eye Protection        Goggles or protective peak when pouring off.
Skin ProtectionWorking clothes.

9. PHYSICAL & CHEMICAL PROPERTIES

Appearance Viscous LiquidExplosive PropertiesN/A
Odour   Slight characteristicOxidising PropertiesN/A
pH6.5 – 7.5      Vapour PressureN/A
Boiling point/range100°C  Relative DensityN/A
Melting point/rangeN/A   Bulk Density  N/A
Flash PointN/A   Partition CoefficientN/A
FlammabilityN/A   Other Data
Auto Flammability  N/A   
SolubilityWater: Miscible Fat: N/A  Solvents:  N/A

10. STABILITY AND REACTIVITY

Conditions to Avoid     None
Materials to Avoid  None
Hazards Decomposition Products   None

11. TOXICOLOGICAL INFORMATION

Acute Oral LD50>2500mg/kg
InhalationThere is no danger from inhalation under normal use conditions.
Inhalation of nebulised product may cause mild irritation to the respiratory system.
Skin Irritation          Skin contact of long duration may cause mild irritation.
Eye irritation            Contact of long duration may cause mild irritation.
Raw Materials – Non Toxic 

12. ECOLOGICAL INFORMATION

General  The product is easily disposed of from waste water by flocculation up to 95%.

13. DISPOSAL

Unused Material     Dispose as household waste but in accordance with any regional or national regulations.
PackagingIn accordance with any regional and national regulations.

14. TRANSPORT INFORMATION

Shipping NameThis product is not classified as hazardous for transport under United Nations Transport Recommendations.
UN Number
Hazard Class
ADR/RID
Symbol
Packaging Group
IATA/DGR Limits 

15. REGULATORY INFORMATION

This product is not classified as hazardous.  

Note:

The regulatory information given above only indicates the principle regulations specifically applicable to the product described in the safety data sheet. The user’s attention is drawn to the possible existence of additional provisions which complete these regulations. Refer to all applicable national, international and local regulations or provisions.

16. OTHER INFORMATION

Legal Disclaimer


The information contained in this data is accurate to the best of our knowledge and is intended to describe our products from the point of view of Health and Safety requirements. It should not, therefore, be construed as guaranteeing any specific properties. Colourcraft C & A Ltd shall not be held liable for any damage resulting from handling or from contact with the above product.

Abbreviations

N/A = Not applicableN/K = Not Known N/D = Not determined
Table of Contents