Have a Question?
< All Topics
Print

Aztec Fabric Medium

Health and Safety Data Sheet – Revised 10/01/2023

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Product Name   Aztec Fabric Medium
Company NameColourcraft Colours & Adhesives Ltd
Unit 5
555 Carlisle Street East
Sheffield
S4 8DT
Telephone0114 242 1431
Fax0114 243 4844
Emergency0114 242 1431

2. COMPOSITION/INFORMATION ON INGREDIENTS

Acetate Copolymer Dispersions, bases and cross linking agents.

3. HAZARDS IDENTIFICATION

Most Important HazardsNone – This product is not classified as hazardous.
Specific HazardsThis product does not present any specific risk.

4. FIRST-AID MEASURES

Inhalation     Unlikely route of exposure. If distress is felt, remove affected person to fresh air.
Skin ContactWash thoroughly with soap and water.                   
Eye Contact Irrigate immediately with water for at least 10 minutes. Should irritation occur, seek medical advice.
Ingestion  Wash mouth out thoroughly with water, give water to drink. In the unlikely  event of sensitivity, seek medical advice.

5. FIRE FIGHTING MEASURES

Product is not considered a fire hazard.
Fire Extinguishing MediaSuitable: Water, Fog, CO2, Dry Powder, Foam.
Unsuitable: None.
Personal Protection Wear self contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.   

6. ACCIDENTAL RELEASE MEASURE

Personal Precautions        Refer to section 8 of HSDS for personal protection details.   
Environmental Precautions Do not allow to contaminate water courses.   
Cleaning Measures Absorb spilled product with sand or inert material. Clean up contaminated area with water.

7. HANDLING & STORAGE

Handling RequirementsAvoid eye contact and also skin contact of long duration. Ensure a good standard of general ventilation in the workplace.
Storage ConditionsStore at a temperature between 6°C and 35°C. Keep container closed and out of the reach of young children.
Suitable PackagingKeep in original packaging.
Additional InformationHandle in accordance with good standards of hygiene and safety

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Inhalation     None under normal usage conditions.
Hand ProtectionNone under normal usage conditions.
Eye Protection        Goggles or protective peak when pouring off.
Skin ProtectionWorking clothes.

9. PHYSICAL & CHEMICAL PROPERTIES

AppearanceViscous Liquid  Explosive PropertiesN/A
OdourSlight characteristicOxidising PropertiesN/A
pH6.5 – 7.5      Vapour Pressure     N/A
Boiling point/range 100°CRelative Density      N/A
Melting point/rangeN/A   Bulk Density  N/A
Flash Point   N/A   Partition CoefficientN/A
FlammabilityN/A   Other Data
Auto Flammability  N/A   
SolubilityWater: Miscible Fat: N/A  Solvents:  N/A

10. STABILITY AND REACTIVITY

Conditions to Avoid     None  
Materials to Avoid  None  
Hazards Decomposition Products   None  

11. TOXICOLOGICAL INFORMATION

Acute Oral LD50>2500mg/kg    
Inhalation     There is no danger from inhalation under normal use conditions.
Inhalation of nebulised product may cause mild irritation to the respiratory system.
Skin Irritation          Skin contact of long duration may cause mild irritation.
Eye irritationNon-Irritant. Contact of long duration may cause mild irritation.
Raw Materials – Non Toxic

12. ECOLOGICAL INFORMATION

General         The product is easily disposed of from waste water by flocculation up to 95%.

13. DISPOSAL

Unused MaterialDispose as household waste but in accordance with any regional or national regulations.
PackagingIn accordance with any regional and national regulations.

14. TRANSPORT INFORMATION

Shipping Name        This product is not classified as hazardous for transport under United Nations Transport Recommendations.
UN Number
Hazard Class
ADR/RID
Symbol
Packaging Group
IATA/DGR Limits 

15. REGULATORY INFORMATION

This product is not classified as hazardous.  

Note

The regulatory information given above only indicates the principle regulations specifically applicable to the product described in the safety data sheet. The user’s attention is drawn to the possible existence of additional provisions which complete these regulations. Refer to all applicable national, international and local regulations or provisions.

16. OTHER INFORMATION

Legal Disclaimer

The information contained in this data is accurate to the best of our knowledge and is intended to describe our products from the point of view of Health and Safety requirements. It should not, therefore, be construed as guaranteeing any specific properties. Colourcraft C & A Ltd shall not be held liable for any damage resulting from handling or from contact with the above product.           

Abbreviations

N/A = Not ApplicableN/K = Not Known N/D = Not Determined
Table of Contents