Please read this information carefully. Please also remember that the advice is based on supply of industrial quantities of binder. It is therefore recommended that this be taken in to account when undertaking risk assessment in the context of significantly lower levels of exposure for this or any other product.
1.IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Product Name
Colourtherm Fabric Binder
Company Name
Colourcraft Colours & Adhesives Ltd Unit 5 555 Carlisle Street East Sheffield S4 8DT
Telephone
0114 242 1431
Fax
0114 243 4844
Emergency
0114 242 1431
2. COMPOSITION/INFORMATION ON INGREDIENTS
Acetate Copolymer Dispersions, bases and cross linking agents.
3. HAZARDS IDENTIFICATION
Most Important Hazards
None – This product is not classified as hazardous.
Specific Hazards
This product does not present any specific risk.
4. FIRST-AID MEASURES
Inhalation
Unlikely route of exposure. If distress is felt, removeaffected person to fresh air.
Skin Contact
Wash thoroughly with soap and water.
Eye Contact
Irrigate with water for at least 10 minutes. Shouldirritation occur, seek medical advice.
Ingestion
Wash mouth out thoroughly with water, give water to drink. In theunlikely event of sensitivity, seek medical advice.
Wear self contained breathing apparatus. Wear protectiveclothing to prevent contact with skin and eyes.
6. ACCIDENTAL RELEASE MEASURE
Personal Precautions
Refer to section 8 of HSDS for personal protection details.
Environmental Precautions
Do not allow to contaminate water courses
Cleaning Measures
Absorb small spills with kitchen roll and soap and water.Large spills – absorb product with sand or inert material. Clean up contaminated area with water.
7. HANDLING & STORAGE
Handling Requirements
Avoid eye contact and also skin contact of long duration.
Storage Conditions
Store at a temperature between 6°C and 35°C. Keep container closed andout of the reach of young children
Suitable Packaging
Keep in original packaging.
Additional Information
Handle in accordance with good standards of hygiene and safetypractices.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Inhalation
None under normal usage conditions.
Hand Protection
None under normal usage conditions.
Eye Protection
Goggles or protective peak when pouring off.6
Skin Protection
Working clothes.
9. PHYSICAL & CHEMICAL PROPERTIES
Appearance
Viscous Liquid
Explosive Properties
N/A
Odour
Slight characteristic
Oxidising Properties
N/A
pH
6.5 – 7.5
Vapour Pressure
N/A
Boiling point/range
100°C
Relative Density
N/A
Melting point/range
N/A
Bulk Density
N/A
Flash Point
N/A
Partition Coefficient
N/A
Flammability
N/A
Other Data
24
Auto Flammability
N/A
26
25
Solubility
Water: Miscible
Fat: N/A
Solvents: N/A
10. STABILITY AND REACTIVITY
Conditions to Avoid
None
Materials to Avoid
None
Hazards Decomposition Products
None
11. TOXICOLOGICAL INFORMATION
Acute Oral LD50
>2500mg/kg
Inhalation
There is no danger from inhalation under normal use conditions. Inhalation of nebulised product may cause mild irritation to therespiratory system.
Skin Irritation
Skin contact of long duration may cause mild irritation.
Eye irritation
Contact of long duration may cause mild irritation.Raw Materials. Non Toxic.
12. ECOLOGICAL INFORMATION
General
The product is easily disposed of from waste water byflocculation up to 95%. Non Toxic.
13. DISPOSAL
Unused Material
Dispose as household waste but in accordance with any regional ornational regulations.
Packaging
In accordance with any regional and national regulations.
14. TRANSPORT INFORMATION
Shipping Name
This product is not classified as hazardous for transport under UnitedNations Transport Recommendations.
UN Number Hazard Class ADR/RID Symbol Packaging Group IATA/DGR Limits
15. REGULATORY INFORMATION
This product is not classified as hazardous for use/sale.
Note
The regulatory information given above only indicates the principle regulations specifically applicable to the product described in the safety data sheet. The user’s attention is drawn to the possible existence of additional provisions which complete these regulations. Refer to all applicable national, international and local regulations or provisions.
16. OTHER INFORMATION
Persons suffering from asthma, other respiratory problems or in the event of previous sensitivityto any art, craft, dye or household products, should consult a physician before participating in the use of any art and craft products including the above. Children should be supervised when carrying out art andcraft activities.
Legal Disclaimer
The information contained in this data is accurate to the best of our knowledge and is intended to describe our products from the point of view of Health and Safety requirements. It should not, therefore, be construed as guaranteeing any specific properties. Colourcraft C & A Ltd shall not be held liable for any damage resulting from handling or from contact with the above product.
