1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Product Name
Devoré Paste
Company Name
Colourcraft Colours & Adhesives Ltd Unit 5 555 Carlisle Street East Sheffield S4 8DT
Telephone
0114 242 1431
Fax
0114 243 4844
Emergency
0114 242 1431
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ready to use textile print paste to produce Devoré effects.
3. HAZARDS IDENTIFICATION
Most Important Hazards
The product causes burns to the skin and eyes if not removed immediately with copious amounts of water.
Specific Hazards
Causes Burns.
4. FIRST-AID MEASURES
General
The product causes burns to the skin and eyes if not removed immediately with copious amounts of water.
Inhalation
If symptoms due to inhalation are observed, remove person to fresh air.
Skin Contact
Wash with plenty of water. Obtain medical attention if necessary.
Eye Contact
Irrigate promptly with plenty of water for at least 15 minutes.Keepeyes wide open whilst rinsing. Obtain medical attention.
Ingestion
Wash mouth out with plenty of water. Do not induce vomiting. Obtain medical attention immediately. Show this safetydata sheet to the Doctor in attendance.
5. FIRE FIGHTING MEASURES
Product is not considered a fire hazard.
Fire Extinguishing Media
Suitable: Water spray, Carbon Dioxide, dry powder, foam. Unsuitable: None.
Personal Protection
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
6. ACCIDENTAL RELEASE MEASURE
Personal Precautions
Wear impervious gloves, safety glasses or goggles and protective clothing.
Environmental Precautions
Avoid subsoil penetration. Absorb material with sandor inert material. Avoid sources of ignition.
Cleaning Measures
Absorb material with sand or inert material. Should spillage occur, care should be taken to prevent generation and breathing of aerosol mist or droplets.
7. HANDLING & STORAGE
Handling Requirements
Product should be used in a well ventilated area. Avoid eye and skin contact. Wear protective clothing i.e. apron, rubber gloves, goggles or safety glasses.
Storage Conditions
Store at temperature between 5°- 40°. Do not freeze. Keep container tightly closed and away from fire and sparks. Keep container closed and out of the reach of young children.
Suitable Packaging
Keep in original packaging.
Additional Information
As with all chemicals handle in accordance with good standards of hygiene and safety practices.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
General
Use in a well ventilated area. Avoid eye and skin contact.Wear protective clothing ie, apron, rubber gloves,goggles or safety glasses.
Respiratory
Work in a well ventilated room. .
Hand Protection
Rubber gloves.
Eye Protection
Safety glasses or goggles.
Skin Protection
Wear suitable protective clothing.
9. PHYSICAL & CHEMICAL PROPERTIES
Appearance
White paste
Explosive Properties
N/A
Odour
Slightly characteristic
Oxidising Properties
N/A
pH
1 – 1.5
Vapour Pressure
N/A
Boiling point/range
N/K
Relative Density
N/A
Melting point/range
N/A
Bulk Density
N/A
Flash Point
N/D
Partition Coefficient
N/A
Flammability
N/A
Other Data
Auto Flammability
N/A
Solubility
Water: Miscible
Fat: N/A
Solvents: N/A
10. STABILITY AND REACTIVITY
Conditions to Avoid
Stable under normal conditions. Avoid extremes of temperature.
Materials to Avoid
Strong Alkalis
Hazards Decomposition Products
Stable under normal conditions. In common with most inorganic substances it will burn if involved in a fire and give off noxious fumes. When heated Sulphuric Acid is formed.
11. TOXICOLOGICAL INFORMATION
Acute Oral LD50
Irritant
Skin Irritation
Irritant
Eye irritation
Irritant
12. ECOLOGICAL INFORMATION
General
Use according to proper working procedures which minimise waste. Large quantities should not be allowed to enter drains or surface waters. Due to the acidic nature of this product, dilutespillages with plenty of water.
13. DISPOSAL
Unused Material
For large quantities, dispose in accordance with local and national regulations regarding disposal.For small quantities, dilute with large amounts of water.
Packaging
In accordance with national regulations.
14. TRANSPORT INFORMATION
Shipping Name
This product is not classified as hazardous for transport underUnited Nations Transport Recommendations.
UN Number Hazard Class ADR/RID Symbol Packaging Group IATA/DGR Limits
15. REGULATORY INFORMATION
References in Annex 1 to 67/548/EEC:
Components which lead to danger classification
ENINECS Nos.
Classified According to Directives 67/548/EEC and Their Various Amendments
Warning Symbols
Corrosive
Warning Words
Corrosive
Risk Phrases
R35, R21/22
Safety Phrases
S24/25 – Avoid contact with skin and eyes.S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 – After contact with skin, wash immediately with plenty ofwater. S36/37/39 – Wear suitable protective clothing, gloves and eye/faceprotection. Wash thoroughly after handling.
Note
The regulatory information given above only indicates the principle regulations specifically applicable to the product described in the safety data sheet. The user’s attention is drawn to the possible existence of additional provisions which complete these regulations. Refer to all applicable national, international and local regulations or provisions.
Children should only use this product under adult supervision.
16. OTHER INFORMATION
Legal Disclaimer
The information contained in this data is accurate to the best of our knowledge and is intended to describe our products from the point of view of Health and Safety requirements. It should not, therefore, be construed as guaranteeing any specific properties. Colourcraft C & A Ltd shall not be held liable for any damage resulting from handling or from contact with the above product.
